Forestry felling & cutting
From selective thinning to commercial harvesting, professional forestry operations need equipment that can combine cutting power, precision and reliability. Our forestry felling and cutting equipment is selected to handle different tree sizes, terrain conditions and operational requirements.
When the job requires more than a chainsaw
Large-scale forestry felling is one of the most technically demanding operations in the field. Tree calibre, stand density, terrain gradient, extraction access and timber destination all influence which equipment will perform best and which will cost you time and money if it’s the wrong fit.
Our forestry felling and cutting fleet is built around the realities of professional timber work. We supply mechanised harvesters, felling heads, delimbers and auxiliary cutting equipment to contractors who operate on tight schedules and can’t afford unreliable machines on site.
Our advisors have forestry backgrounds. They understand the difference between a thinning operation on a 15-year-old softwood plantation and an emergency windthrow clearance on mixed broadleaf and they’ll match your equipment to your specific brief, not a generic catalogue entry.
Equipment designed for professional forestry
Our forestry felling fleet includes mechanised harvesters, felling heads, delimbers and auxiliary cutting equipment designed for demanding timber operations. The right combination depends on the specific requirements of each site and the work schedule.
Our advisors bring practical forestry experience to the equipment selection process. They understand that a thinning operation in a young softwood plantation presents very different challenges from clearing windthrown trees in a mixed broadleaf stand.
Rather than recommending equipment based on a standard catalogue, we consider the actual working conditions, the type of trees involved and the objectives of the operation. This helps ensure that the machinery supplied is appropriate for the job from the outset.
Cutting and felling machines for every operation
Our fleet includes equipment for both high-volume harvesting and more specialised felling work:
Forestry harvesters
Forestry harvesters combine felling, delimbing and cross-cutting in a single operation. They are suitable for commercial softwood and hardwood harvesting, with different harvesting-head sizes to match tree diameter. Wheeled and tracked options are available according to terrain.
Felling heads & harvesting heads
Felling and harvesting heads can be used with compatible carrier machines, giving operators access to specialist cutting equipment without necessarily renting a complete harvester. Options are available for accumulating felling, processing and directional felling.
Mechanised chainsaws & felling arms
For selective felling, restricted sites or irregular terrain, mechanised chainsaws and felling arms provide controlled cutting power where a full harvester may not be practical. They can also reduce the need for operators to work directly in hazardous areas.
Delimbers
Mobile and stationary delimbers process felled stems at roadside or landing areas. They provide faster and more consistent delimbing than manual processing, particularly for higher-volume forestry operations.
Brushwood chippers (Large format)
Our large-format wood chippers are designed to process branches, brash and small-diameter timber on site. This helps reduce accumulated material that could otherwise obstruct extraction routes or create additional site-management work.
Directional felling equipment
When trees are located close to buildings, roads, infrastructure or other restricted areas, directional felling equipment provides greater control over the felling process. Specialist wedges, pulling systems and rigging equipment can be supplied as part of a complete felling solution.
The operations our equipment is designed for
Forestry work varies considerably depending on the objective, terrain and condition of the woodland. Our forestry felling equipment is designed to support professional operations ranging from planned timber harvesting to selective management and urgent clearance.
Commercial timber harvesting
For commercial timber harvesting, our harvesters and processing heads provide consistent output across softwood and hardwood operations. The right equipment helps maintain production rates while limiting avoidable downtime.
Selective thinning & forest management
Selective thinning requires control as much as cutting power. Our mechanised felling equipment helps remove targeted trees while reducing unnecessary impact on remaining stands and surrounding ground.
Storm damage & windthrow clearance
Storm-damaged woodland can contain uprooted trees, unstable stems and tangled crowns. Our forestry machinery is suited to demanding clearance conditions, helping professional teamsmanage difficult sites efficiently after severe weather.
Ecological & habitat management thinning
Mechanised equipment can also support ecological woodland management, including selective thinning, invasive-species removal and habitat restoration. Low-ground-pressure options are available for operations where protecting sensitive soils is a priority.
Pre-development woodland clearance
Development and infrastructure projects may require partial or complete woodland clearance before construction begins. Our felling equipment can handle larger-scale operations and work alongside our site-preparation services.
Plantation end-of-rotation felling
For mature plantations such as Sitka spruce, Douglas fir, larch and pine, choosing the right harvesting system is essential. We consider factors such as stand size, terrain, extraction routes and landing capacity when recommending suitable equipment.
Roadside & infrastructure corridor clearance
Felling alongside roads, railways and utility corridors requires particular care and control. Our directional felling equipment supports operations in constrained environments, helping contractors manage vegetation while taking surrounding infrastructure into account.
Felling done right every time
The machines we supply for forestry felling meet applicable CE and regulatory requirements. Before delivery, our technicians check the main safety systems, including emergency stops, cab protection, limb guards and load monitoring equipment, to ensure they are operating correctly.
Where required, we can also provide an on-site handover covering machine operation, precautions related to the terrain and emergency procedures. For projects near public infrastructure or within controlled safety areas, we can discuss relevant compliance requirements when preparing the quotation.
Safety does not stop once the machine reaches the site. Conditions can change during a felling operation, whether because of weather, ground conditions or changes to extraction routes. Our team remains available throughout the rental period so operators can discuss these changes and adapt the equipment or working approach when necessary.
From brief to operational in four steps
Choosing the right forestry felling equipment starts with understanding the operation. We keep the process simple: assess your requirements, recommend suitable equipment, arrange delivery and remain available throughout the rental.
1 - Tell us about your operation
Share the key details of your project:
- Stand type and average DBH
- Terrain and ground conditions
- Extraction and site access
- Expected daily production
- Project timeline
This information helps us identify equipment that genuinely matches your working conditions.
2 - We recommend the right equipment
Our advisors review your requirements and recommend the most appropriate harvester, felling head or cutting system. We explain the practical differences between available options, including their advantages and limitations, so you can make an informed choice.
3 - Delivery within 48 hours
Once confirmed, we deliver the machine to your landing or site access point within 48 hours, subject to availability and logistics.
An operator briefing can cover the essential controls, safety systems and recommended operating parameters for the equipment and terrain.
4 - Support throughout your rental
Our team provides technical assistance 7 days a week during the rental period. If equipment needs an adjustment, an error occurs or site conditions change, you can contact us for practical support.
The objective is simple: keep the machine working effectively and minimise unnecessary interruptions to your forestry operation.
Trusted by contractors who can't afford downtime
Our forestry felling equipment is used by professionals working across a range of forestry, infrastructure and land-management operations, including:
- Commercial forestry contractors and timber operators
- Woodland management companies and estate forestry teams
- Civil engineering firms carrying out pre-development clearance
- Local authorities managing public woodland
- Conservation bodies and environmental agencies
- Utility and infrastructure corridor maintenance teams
- Emergency response contractors handling storm-damage clearance
These operations have different requirements, but they share the same need: reliable equipment that is suited to the site and available when the work needs to be done.
The operations that come before and after felling
Felling is rarely a standalone operation. Preparing the site beforehand and managing the material afterwards can be just as important to keeping a project on schedule.
Brush Cutting & Mulching
Before tree felling, dense undergrowth may need to be cleared to improve machine access and operator visibility. Our brush cutting and mulching equipment helps prepare the work area by clearing brambles, scrub and other vegetation. This initial clearance can make subsequent forestry operations more practical and help create a more manageable working environment.
Handling & Skidding
Cleared material still needs to be moved efficiently. Our forestry cranes, skidders and forwarders are suited to extraction across steep slopes, soft ground and areas with limited access.
Worksite Preparation
Once vegetation and timber have been cleared, the site can be prepared for its next phase. Our stump grinders, wood chippers and ground-preparation equipment can support projects involving construction, replanting, agricultural use or land restoration.
Planning a felling operation?
Every felling operation has its own requirements. The right equipment depends on the trees, terrain, access conditions and expected workload.
Tell us the essentials of your project:
- Stand type and average tree size
- Terrain and access conditions
- Estimated timber volume
- Project timeline
Our team will review the information and come back to you within 24 hours with a suitable equipment recommendation and a clear, no-obligation quote.